K-Net Photos

Welcome to archived photos on media.knet.ca

[ stop the slideshow ]

Turn the Linkway 2100 modem back on. After a few minutes internet connectivity should be restored. If not, check the coaxial cab

aah.jpg The 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equThe 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]ThumbnailsNow connect power to the IDC SRA2100 DVB IRD. Make sure the power cable is plugged into the UPS with all the other satellite equ

Turn the Linkway 2100 modem back on. After a few minutes internet connectivity should be restored. If not, check the coaxial cable to make sure the proper ports were connected.