K-Net Photos

Welcome to archived photos on media.knet.ca

Home /

The coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".

aac.jpg A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]A closeup of where the coaxial cable connects to the Linkway 2100.



Before the new cable can be connect, disconnect the exisThumbnailsThe 2-way splitter. 
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. 
[*]

The coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".

0 comments