K-Net Photos

Welcome to archived photos on media.knet.ca

Home /

The 2-way splitter. [list] [*]The coaxial cable coming from the LNB at the dish connects to the single port on the top. [*]

aab.jpg The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".The back panel of the International Datacasting (IDC) SRA2100 DVB receiver is on the top. The back panel of the Linkway 2100 is ThumbnailsThe coaxial lines connected to the RF connectors of the IDC DVB IRD and the Linkway 2100. The port is labelled "Rx".

The 2-way splitter.
[list]
[*]The coaxial cable coming from the LNB at the dish connects to the single port on the top.
[*]The coaxial cable to the Linkway 2100 connects to the bottom right.
[*]The coaxial cable to the IDC SRA2100 DVB IRD connects to the bottom left.
[/list]
Where the connectors are connected to is important! The diagonal solid line on the splitter indicates a path that has DC continuity. This path is required for the Linkway 2100 to supply power to the LNB.

0 comments